Search for Performer

Read on to understand The way to replace your Laptop CPU or Laptop Processor of one's Dell Vostro 1400.


For this function, you need to use some tools like one flathead and one flip screwdriver. To save you time, here is a tutorial defined in steps, that you will come to know how various Dell parts, if needed, are removed and placed back.
Step 1: Remove laptop battery
To replace the Laptop CPU using the other one, you will need to first remove the battery, one of many significant Dell parts. At the backside of the laptop, push both locks, the one that is positioned about the left upper corner and yet another about the right upper corner, and slide the battery out.
Step 2: Remove plastic cover
Remove the Plastic Cover, which is one of many Laptop Parts, hiding the heat sink. This is achieved by taking out the 3 screws, holding that little bit of plastic, with the help themselves of the flip screwdriver.
Step three: Remove heat sink
Before you unlock your existing Laptop Processor, the next move is to remove the heat sink, by unscrewing the 4 screws holding it, with all the flip screwdriver again.
Now, it is possible to lift heat sink and it aside. For laptop CPU, a heat sink is among the more inclined laptop parts, that is utilized to dissipate the warmth generated.
Step # 4: Unlock laptop processor
Now unlock your current Laptop Processor, using the flathead screwdriver. There is also a slot to get a flathead screw driver, right towards the top of the CPU socket you can also say in the upper left corner with the CPU. There you will position the flathead screw driver and slightly turn it to left to eliminate the fixed laptop CPU.
When you're completed with this, go ahead and take laptop processor out from the socket. Be mindful while handling the laptop parts; make sure the pins are not bending.
Step 5: Installing new processor
After removing your overall Laptop Processor, take the new one. So that you can install the newest laptop CPU correctly, match the corners, as possible clearly judge, which may function as correct corner around the socket. Underneath right corner is needed to be placed accordingly.
Before getting an excellent view, you may then lock a laptop CPU as a substitute. Repair it by using the flathead screwdriver, turning it from left to right.
Step 6: Apply thermal paste to CPU
The next step after placing the Laptop CPU for the right place may be to apply thermal paste. Simply, apply a pea size dot of thermal paste in the middle around the laptop processor. There are particular things in the laptop parts, which require additional care.
Therefore, this paste is used, prior to the installation of heat sink, which helps to conduct heat more efficiently.
Now put the heat sink, back to its original position, after utilizing the thermal compound.
To spread the paste easily, just press heat sink in the middle. Fix the heat sink at its place by tightening its screws from one side with other diagonally.
Step 7: Putting all back
Now hide heat sink by fixing the little bit of plastic to its place, position the 3 screws and tight them. You've successfully replaced your old laptop processor with all the another one.